Rammer’s Biggest Just Got Better
World-leading hydraulic hammer and attachment brand Rammer will use the ConExpo exhibition in Las Vegas (7 to 11 March 2017) as the international launch pad for the latest incarnation of its largest breaker.
Visitors to the ConExpo exhibition will be the first to see the latest version of Rammer’s largest hydraulic hammer when they visit the stand of US distributor Allied CP. Called the Rammer 9033, the new model replaces the highly successful Rammer 7013 and benefits from a number of key changes and improvements, many of which have been proven in smaller Rammer hammers.
These improvements include:
• A 20 percent wider carrier weight range than the Rammer 7013
• A 22 percent higher input power which significantly increases impact rate and productivity compared to its predecessor
These massive, customer-friendly improvements have been achieved by equipping the new Rammer 9033 with many of the key features recently applied to other models in the Rammer Large and Medium ranges. ”Our engineers have applied lessons learned on other hammer models to place this Rammer hammer at the very top of its class,” says Rammer General Manager Rafa López. “The Rammer 9033 completes the successful Rammer Large hammers family by replacing the aged 7013 with a modern design that extends some of the specifications such as carrier range allowed and tool diameter.”
Weighing in at 15,432 lb (7,000 kg), the new Rammer 9033 is suitable for carriers in the 134,400 to 268,800 lb (60 to 120 tons) operating weight range. Impact rate on the long stroke setting rises from a maximum of 450 blows per minute to 520, while maximum oil flow rises to 121.5 gallons per minute (460 litres per minute) against the 105.6 gallons per minute (400 litres per minute) on the Rammer 7013. Input power is up from 152 to 185 hp (113 to 138 kW), a rise of 22 percent.
Stroke length and Idle Blow Protection can be easily adjusted to allow the Rammer 9033 to be purpose-matched to individual applications. The long stroke setting uses a lower blow frequency for optimum breaking in hard materials, such as granite and reinforced concrete foundations, while the short stroke setting delivers higher blow frequency which is ideal for softer materials, such as limestone. The Idle Blow Protector on/off selector allows the operator to easily adjust the working mode to protect against idle strokes.
Like the other models in Rammer’s Large Range of hydraulic hammers, the new 9033 is designed for a long, trouble-free life. The new model utilizes long-life, high-tension VIDAT tie rods for improved reliability and lower operating costs. The tool-retaining pins are locked by simple, reliable rubber rings, while the surface of the lower tool bushing has been specifically designed to provide longer tool life.
The Rammer 9033 also becomes the latest (and final) model in the Rammer Large Range to benefit from the addition of the Ramvalve overflow protection system.
The Ramvalve monitors the oil flow through the hammer. If the oil flow exceeds the pre-defined setting, the valve adjusts the flow to a very low level and drops the hammer’s impact rate. The Ramvalve resets after the hammer re-starts with a correct oil flow. This highly effective system provides excellent protection against accidental overflowing and overpressure, enhances hammer’s reliability, and offers improved protection against oil spills.
To further extend the working life of the Rammer 9033 it is offered with three greasing options: a centralized manual option; carrier-mounted Ramlube I automatic greasing; or Ramlube II, which utilizes a cartridge mounted on the hammer to automatically deliver optimum levels of lubrication for greater wear protection and a longer service life. The new model also comes equipped with Rammer’s Ramdata II service indicator that allows operators and service personnel to monitor and log vital service and maintenance information to further minimize downtime.
All these key features are backed by long-life, wear resistant, genuine Rammer parts that are readily available for the company’s global dealer network.
For further information, please contact:
General Manager, Sales
Sandvik Mining and Rock Technology, Breakers
Tel. Mobile: +34 609 33 10 50
Tel. Office: +34 96 132 30 10