Ramdata II uses advanced electronics to sense the impacts, and stresses on the hammer. It is a service indicator device designed to help operators and service personnel to get information about the service interval status, service history and accumulated working history of a hammer.
Trenching is a form of primary breaking in which a narrow trench is excavated especially for laying pipes, cables or for installing drainage
Hydraulic excavators have largely replaced cranes with wrecking balls, enabling demolition to be carried out in a much more controlled and efficient manner.
Mobile aggregate crushing
Crushing is used for mechanical size reduction of feed material. A number of different crusher types may be used
Low clearance hammer tunneling
Especially in the underground mining industry the tunneling operations do not always allow for enough clearance, this restricts the types of carriers that can work in these environments.
Scaling is removal of loose material from the tunnel roof and walls to prevent accidents by falling rocks.
- Asphalt Cutting
Hammer fitted to an excavator working directly in a bench to breaks away rock which can then be removed by truck. This is most commonly used where blasting is not allowed.
- Ground Compacting
When blasted rock is too big for the feeder or crusher, secondary breaking is needed to get the boulders down to size. The type of rock dictates the effectiveness of the process, with brittle rock giving the best performance.
Blockage and build-ups
Productivity can only be maintained with the right support.
Demolition is more than just swinging a sledgehammer or ramming a hydraulic breaker into old concrete.
The metallurgical industries can be broadly divided into primary, secondary, and miscellaneous metal production operations.