The 340 kg RCC04R is designed specifically for primary demolition and for use with mini and robot carriers in the 3 to 6 tonne range.
Both cylinders feature a hydraulic booster, which intensifies the input pressure, dramatically increasing the power-to-weight ratio, and supplying the performance that you would only normally see from much larger attachment.
The RCC04R unique jaw design allows for large opening whilst maintaining its light structure.
Enables the operator to control and place the equipment rapidly which increases the productivity.
The braking and holding force can be pre-adjusted. Correct adjustment protects your crusher and the carrier.
This design eliminates a separate hydraulic circuit for braking system from the excavator.
Increases the power-to-weight ratio of the product by intensifing the input pressure in the cylinders
The cylinders are fully protected throughout the working cycle. Increasing durability and extending service intervals.
The double main bearings of the crushing arms optimize the position of the cylinders to the crushing arms. This increases the crushing force and the opening width.
The double surface area of the bearings increases the lifetime of the equipment.
Your benefit is reduced costs and increased performance.
Highly resistant material to work on concrete.
Field replaceable and adjustable symmetrical cutter blades minimize downtime and significantly increase the working life of wear parts
Hardened parts are more wear resistant, extending their working life and lowering owning and operating costs
Filters and maintains both the oil circuit and pressure thoughout the working cycle.
Demolition of standing buildings and structures.
Re-using parts or material which has been extracted from existing buildings or structures.
Recyclng of products: Re-use of material or parts as such
Recycling of material: Re-use of material for other purposes
For Hazardous applications:
| Minimum working weight, flange mounted *1 | 340 kg | 749 lb |
| Weight | 300 kg | 750 lb |
| Max. jaw opening | 440 mm | 17.32 in |
| Jaw depth | 200 mm | 7.87 in |
| Max. cutting force | 1300 kN | |
| Max. crushing force | 440 kN | |
| Operating pressure | 250 bar | |
| Max. operating pressure | 250 bar | 3625 psi |
| Oil flow | 65 l/min | 17.2 gal/min |
| Oil flow range | 65 l/min | 17.2 gal/min |
| Oil flow (recom.) | 65 l/min | 17.2 gal/min |
| Closing time at max oil flow | 2.3 s | |
| Opening time at max oil flow | 1.1 s | |
| No. of cycles per minute at max oil flow | 17 | |
| Cutting blade length | 85 mm | 3.35 in |
| Max. diameter to be cut | 25 mm | 0.98 in |
| Rotation | 360 ° | |
| Pressure line connection (IN) | 1/2" BSP | |
| Return line connection (OUT) | 1/2" BSP | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, range *2 | 3 - 6 t | 6600 - 13200 lb |
| *1 Includes average mounting bracket and standard wear parts *2 Check carrier allowed attachment weight from carrier manufacturer. Check application requirements. |
||
Specifications are subject to change without notice (Friday, March 3, 2023)