Specification

Minimum working weight, flange mounted  *1870 kg1920 lb
Weight710 kg1570 lb
Working length2004 mm78.9 in
Impact rate (frequency)550 - 950 bpm
Operating pressure140 - 160 bar2030 - 2320 psi
Pressure relief min  *2220 bar3190 psi
Pressure relief max240 bar3480 psi
Oil flow range80 - 140 l/min21.1 - 37.0 gal/min
Back pressure max10 bar145 psi
Input power37 kW50 hp
Tool diameter105 mm4.13 in
Pressure line connection (IN)ORFS ( 1 7/16-12 UN )
Return line connection (OUT)ORFS ( 1 7/16-12 UN )
Pressure line size  *319 mm0.75 in
Return line size  *319 mm0.75 in
Grease connectionTema 2520
Optimum oil temperature40 - 60 °C104 - 140 °F
Allowed oil temperature range-20 - 80 °C-4 - 176 °F
Optimum oil viscosity at operating temperature30 - 60 cSt
Allowed viscosity range20 - 1000 cSt
Carrier weight, optimum11 - 17 t24300 - 37500 lb
Carrier weight, range  *410 - 19 t22000 - 41900 lb
Noise level, measured (2000/14/EC)120 dB(A)
Noise level, guaranteed (2000/14/EC)124 dB(A)
*1   Includes average mounting bracket and standard tool
*2   Minimum setting = actual operating pressure + 50 bar or 725 psi
*3   minimum inner diameter
*4   Check carrier allowed attachment weight from carrier manufacturer. Check application requirements.

Specifications are subject to change without notice (Tuesday, November 13, 2018)

Tools

The Standard Chisel Tool is design to suply the breaking means to tackle hard rock and re-enforced concrete.
Moil Point tools allow for optimum positioning in material which are loose or can be easily separated, eg brick walls or loose rock in tunne...
The Standard Blunt tool is designed to deliver the full force of a hammers impact energy directly into the hard materials that it has been d...
The Asphalt Cutting Tools are ideal for cutting through materials such as asphalt and frozen or compact ground. The Asphalt Cutting Tool all...
The Asphalt Cutting Tools are ideal for cutting through materials such as asphalt and frozen or compact ground. The Asphalt Cutting Tool all...

Parts

Ensure cost efficient performance. Our service kits are designed to ensure that you have all the correct spares and wears on hand when it's ...
The Tool saver (TS) bushing has been designed to extend the service life for the tool and tool retaining pins in highly abrasive application...
The Tool saver (TS) bushing has been designed to extend the service life for the tool and tool retaining pins in highly abrasive application...
The next level in cost efficient performance. Our service kits 2, kits are designed to ensure that you have all the correct spares and wears...
Tool grease is an essential when using most hydraulic hammers, it needs to withstand high temperatures and pressure. Our special tool grease...
Tool grease is an essential when using most hydraulic hammers, it needs to withstand high temperatures and pressure. Our special tool grease...
Tool grease is an essential when using most hydraulic hammers, it needs to withstand high temperatures and pressure. Our special tool grease...
Tool grease is an essential when using most hydraulic hammers, it needs to withstand high temperatures and pressure. Rammer Special Tool Gre...

Accessories

AGW

The AGW (Air, Grease & Water) service box is designed to be mounted on any excavator, to act as a mobile service unit for any the attachment...
Automatic lubrication system designed to ensures a long, trouble-free life specifically for hydraulic hammers. The pump unit is electrically...
The Ramair air flush system is designed to prevent dirt from entering the hammer housing and keep the tool grease flowing towards the lower ...