Minimum working weight, flange mounted  *11240 kg2730 lb
Weight1040 kg2290 lb
Working length2198 mm86.5 in
Impact rate (frequency)490 - 780 bpm
Operating pressure140 - 160 bar2030 - 2320 psi
Oil flow range120 - 180 l/min31.7 - 47.6 gal/min
Pressure relief setting  *2220 bar3190 psi
Pressure relief max240 bar3480 psi
Back pressure max10 bar145 psi
Input power48 kW64 hp
Tool diameter118 mm4.65 in
Pressure line connection (IN)ORFS ISO 8434-3 ( 1 11/16-12 UN )
Return line connection (OUT)ORFS ISO 8434-3 ( 1 11/16-12 UN )
Pressure line size, min. inner diameter26 mm1.02 in
Return line size, min. inner diameter26 mm1.02 in
Grease connectionTema 2520
Optimum oil temperature40 - 60 °C104 - 140 °F
Allowed oil temperature range-20 - 80 °C-4 - 176 °F
Optimum oil viscosity at operating temperature30 - 60 cSt
Allowed viscosity range20 - 1000 cSt
Carrier weight, optimum19 - 22 t41900 - 48500 lb
Carrier weight, range  *314 - 26 t30900 - 57300 lb
Noise level, measured (2000/14/EC)124 dB(A)
Noise level, guaranteed (2000/14/EC)128 dB(A)
*1   Includes average mounting bracket and standard wear parts
*2   Minimum setting = actually measured operating pressure + 50 bar or 725 psi
*3   Check carrier allowed attachment weight from carrier manufacturer. Check application requirements.

Specifications are subject to change without notice (Friday, March 22, 2024)


The Standard Chisel Tool is used for rock and reinforced concrete.
Limestone Chisel Tool is used in application with high penetration rate. Wedge of tool is large which decrease penetration and so increase c...
The Long Chisel is designed to be used mainly on a breaker boom, where it supplies the extra length to tackle hard rock that may obstruct a ...
Moil Point tools allow for optimum positioning in material which is loose or can be easily separated, e.g. brick walls or loose rock in tunn...
The Pyramid Tool makes light work of breaking non-abrasive material of all strengths. Non-abrasive materials which allow a high penetration ...
The Standard Blunt tool is designed to deliver the full force of a hammers impact energy directly into the hard materials that it has been d...
The Long Blunt tool is designed to provide that extra reach, which a standard blunt can't supply. The Long Blunt is designed to be utilized ...
The Long Moil Point Tool is designed to be used mainly with a breaker boom where it supplies the extra length to break rock which may block ...


RD3 is the latest in monitoring technology for hydraulic hammers. The monitoring data is available for all stakeholders through the SAM digi...
The Ramair air flush system is designed to prevent dirt from entering the hammer housing and keep the tool grease flowing towards the lower ...
Tool grease is essential when using hydraulic hammers. It needs to withstand high temperatures and pressure. Our special tool grease has bee...
Rammer Special Tool Grease withstand high temperatures and pressure, it keeps on working and keeping your hammer working when ordinary tool ...
Tool grease needs to withstand high temperatures and pressure. But in some climates and applications it may also be exposed to extremely col...
BIO Tool grease is a modern high performance biodegradable grease for hydraulic hammers. This tool grease is specially formulated to be envi...


This integrated automatic lubrication device ensures a long, trouble-free life for hydraulic hammer models 1533E & 2155E.
Automatic lubrication system has been designed to ensure a long, trouble-free life specifically for hydraulic hammers. The pump unit is elec...
Ramlube II automatic greasing device can be installed to the existing hammers, to better ensure a long, trouble-free service life.

Reason for contact