Designed to satisfy the specific demands of rental fleet operators, the 505 kg 999, is designed for optimum carrier compatibility and installation flexibility. It features a pivoting hose connecting block and reversible manifold that allows for both right or left-hand hose connections, in addition to it's ability to accept a wide range of oil flows and pressures.
The Flange mounting mounting design allows for the use of existing mounting plates, as well as carrier and application specific customization.
The twin-handed design allows optimal mounting on both left and right handed carriers, prolonging the service life of the hose connections.
Single lower tool bushing
The single lower tool bushing, replaces the need for an upper and lower tool bushing, whilst being field replacable. This makes for faster and easier field service.
Membrane type accumulator
Membrane-type accumulator eliminates nitrogen leakages, ensuring maximum piston acceleration and removing the need for time-consuming recharging.
- CBE+ (Constant blow energy plus)
The light weight design allows the use of smaller carriers without compromising the stability of the carrier.
No tie rods
Fast and easy to service with no particular tooling needed for it
Trenching is a form of primary breaking in which a narrow trench is excavated especially for laying pipes, cables or for installing drainage
Hydraulic excavators have largely replaced cranes with wrecking balls, enabling demolition to be carried out in a much more controlled and efficient manner.
- Asphalt Cutting
- Ground Compacting
|Minimum working weight, flange mounted *1||505 kg||1110 lb|
|Weight||415 kg||910 lb|
|Working length||1669 mm||65.7 in|
|Impact rate (frequency)||500 - 1700 bpm|
|Operating pressure||100 - 140 bar||1450 - 2030 psi|
|Pressure relief min *2||150 - 190 bar||2175 - 2755 psi|
|Pressure relief max||220 bar||3190 psi|
|Pressure in LP-circuit||36 - 38 bar||520 - 550 psi|
|Oil flow range||50 - 150 l/min||13.2 - 39.6 gal/min|
|Back pressure max||20 bar||290 psi|
|Input power||35 kW||47 hp|
|Tool diameter||90 mm||3.54 in|
|Pressure line connection (IN)||BSPP-internal 1"|
|Return line connection (OUT)||BSPP-internal 1"|
|Pressure line size *3||26 mm||1.02 in|
|Return line size *3||26 mm||1.02 in|
|Optimum oil temperature||40 - 60 °C||104 - 140 °F|
|Allowed oil temperature range||-20 - 80 °C||-4 - 176 °F|
|Optimum oil viscosity at operating temperature||30 - 60 cSt|
|Allowed viscosity range||20 - 1000 cSt|
|Skid steer, robot weight, optimum||4.4 - 7.1 t||9700 - 15700 lb|
|Skid steer, robot weight, range *4||3.9 - 8.7 t||8600 - 19200 lb|
|Miniexcavator, tractor backhoe weight, Optium||6.6 - 10.6 t||14600 - 23400 lb|
|Miniexcavator, tractor backhoe weight, Range *4||5.8 - 13.0 t||12800 - 28700 lb|
|Noise level, measured (2000/14/EC)||123 dB(A)|
|Noise level, guaranteed (2000/14/EC)||127 dB(A)|
|*1 Includes average mounting bracket and standard tool
*2 Minimum setting = actual operating pressure + 50 bar or 725 psi
*3 minimum inner diameter
*4 Check carrier allowed attachment weight from carrier manufacturer. Check application requirements.
Specifications are subject to change without notice (Friday, November 9, 2018)