The RSS08R Scrap Shears can be used in every industrial demolition job involving the cutting and recovery of ferrous materials such as iron sections, pipes, tanks, railway carriages etc
Replaceable pearcing tip
A bolt on pearcing tip, removes the need for welding and rebuilding which lowers the cost of owning and operation.
Hydraulic rotation with protection valve
The protected rotation system allows precision tool placement, lowering/reducing owning and operating costs.
Field replaceable and adjustable central pin
Enables the operator to maintain the product on the site keeping cutting capacity on the maximum level.
Hydraulic cylinder shielding
The cylinders are fully protected throughout the working cycle. Increasing durability and extending service intervals.
Smart jaws design featuring double guide
Avoids material to stuck between the jaws which increases productivity and cutting capacity
Heat treated pins and bushings
Hardened parts are more wear resistant, extending their working life and lowering owning and operating costs
Manufactured from HB400 steel
Highly resistant material to work on concrete
Bolt on, symmetrical cutter blades
Field replaceable and ajustable cutter blades minimize downtime and signifantly increase the working life of wear parts
Structural Steel is primarily removed during a demolition project by means of an attachment, with cutter blades.
The metal recycling industry encompasses a wide range of metals. The more frequently recycled metals are scrap steels.
Scrapyards (also known as a wrecking yard, junkyard, or breaker's yard) trade in scrap.
|Minimum working weight, flange mounted||675 kg||1490 lb|
|Weight||605 kg||1330 lb|
|Max. jaw opening||290 mm||11.42 in|
|Max. cutting force||880 kN|
|Max. crushing force||460 kN|
|Operating pressure||250 - 300 bar||3626 - 4351 psi|
|Max. operating pressure||300 bar||4351 psi|
|Max pressure for hydraulic rotation||100 bar||1450 psi|
|Oil flow range||80 - 100 l/min||21.1 - 26.4 gal/min|
|Oil flow for hydraulic rotation||15 l/min||4.0 gal/min|
|Closing time at max oil flow||2.8 s|
|Opening time at max oil flow||2.0 s|
|No. of cycles per minute at max oil flow||12.6|
|Pressure line connection (IN)||1/2" GAS|
|Return line connection (OUT)||1/2" GAS|
|Connections, rotation||1/2" GAS|
|Optimum oil temperature||40 - 60 °C||104 - 140 °F|
|Allowed oil temperature range||-20 - 80 °C||-4 - 176 °F|
|Optimum oil viscosity at operating temperature||30 - 60 cSt|
|Allowed viscosity range||20 - 1000 cSt|
|Carrier weight, range||6 - 9 t||13200 - 19800 lb|