The RPV03S Static Pulveriser, is the ideal attachment for secondary demolition. The RPV03S is the perfect tool for crushing reinforced concrete and separating the rebar from the aggregate.
Bolt on cutting blades
Field replaceable and ajustable cutter blades minimize downtime and signifantly increase the working life of wear
Hydraulic cylinder shielding
The cylinders are fully protected throughout the working cycle. Increasing durability and extending service intervals.
Grated jaw design
The fixed jaw allows crushed material to pass through increasing productivity
Heat treated pins and bushings
Hardened parts are more wear resistant, extending their working life and lowering owning and operating costs
Manufactured from HB400 steel
Highly resistant material to work on concrete
Hydraulic excavators have largely replaced cranes with wrecking balls, enabling demolition to be carried out in a much more controlled and efficient manner.
You can increase crusher capacity by up to 50% through good preparation of the input material. The maximum size should be about 80% of the crusher inlet opening.
rebar used extensivily in the construction industry to re-enforce concrete, as is designed to carry the tensile load.
|Minimum working weight||140 kg||310 lb|
|Weight||120 kg||260 lb|
|Height||770 mm||30.30 in|
|Max. jaw opening||300 mm||11.80 in|
|Max. cutting force||410 kN|
|Max. crushing force||200 kN|
|Jaw width||220 mm||8.70 in|
|Operating pressure||200 - 250 bar||2900 - 3626 psi|
|Max. operating pressure||250 bar||3626 psi|
|Oil flow range||30 - 60 l/min||7.9 - 15.9 gal/min|
|Closing time at max oil flow||3.1 s|
|Opening time at max oil flow||2.0 s|
|Cutting blade length||15 mm||0.6 in|
|No. of cycles per minute at max oil flow||11.7|
|Max. diameter to be cut||11 mm||0.59 in|
|Pressure line connection (IN)||SAE 6000 psi 3/8"|
|Return line connection (OUT)||SAE 6000 psi 3/8"|
|Optimum oil temperature||40 - 60 °C||104 - 140 °F|
|Allowed oil temperature range||-20 - 80 °C||-4 - 176 °F|
|Optimum oil viscosity at operating temperature||30 - 60 cSt|
|Allowed viscosity range||20 - 1000 cSt|
|Carrier weight, range||1.5 - 4 t||3300 - 8800 lb|