Especificación

Mínimo peso de servicio, cabezal incluido  *13380 kg7450 lb
Peso2800 kg6170 lb
Longitud de trabajo2962 mm116,6 in
Frecuencia de impacto, Carrera larga400 - 560 bpm
Frecuencia de impacto, Carrera corta 520 - 700 bpm
Presión de operación150 - 160 bar2175 - 2320 psi
Mínima presión de alivio  *2210 bar3045 psi
Máxima presión de alivio230 bar3335 psi
Límites de caudal de aceite250 - 350 l/min66,0 - 92,5 gal/min
Contrapresión maxima12 bar175 psi
Potencia de entrada93 kW125 hp
Diámetro de la herramienta166 mm6,54 in
Presión en la línea de conexión (IN)SAE 6000 psi 1 1/4"
Retorno en la línea de conexión (OUT)SAE 6000 psi 1 1/4"
Diámetro de la línea de presión  *332 mm1,26 in
Diámetro de la línea de retorno  *332 mm1,26 in
Conexión para grasaBSPP-internal 3/8"
Conexión de aire (A)BSPP-internal 3/8"
Optima temperature del aceite40 - 60 °C104 - 140 °F
Rango permitido de la temperature del aceite-20 - 80 °C-4 - 176 °F
Optima viscosidad del aceite a la temperature de operación30 - 60 cSt
Rango de viscosidad permitido20 - 1000 cSt
Peso óptimo de la máquina portadora37 - 50 t81600 - 110200 lb
Rango de peso de la máquina portadora  *434 - 55 t75000 - 121300 lb
Nivel de sonido, medido (2000/14/EC)126 dB(A)
Nivel de sonido, garantizado (2000/14/EC)130 dB(A)
*1   Includes average mounting bracket and standard tool
*2   Minimum setting = actual operating pressure + 50 bar or 725 psi
*3   minimum inner diameter
*4   Check carrier allowed attachment weight from carrier manufacturer. Check application requirements.

Specifications are subject to change without notice (jueves, 26 de abril de 2018)

Útiles

The Standard Chisel Tool is design to suply the breaking means to tackle hard rock and re-enforced concrete.
Drilling and blasting have always been the traditional solution when it comes to hard rock. But the Hard Rock Chieel has turned the tides, a...
Limestone Chisel Tool is used in application with high penetration rate. Wedge of tool is large which decrease penetration and so increase c...
Moil Point tools allow for optimum positioning in material which are loose or can be easily separated, eg brick walls or loose rock in tunne...
The Pyramid Tool makes light work out of breaking nonabrasive materials of all strengths. Nonabrasive materials which allow a high penetrati...
La herramienta de punta cónica permita un óptimo posicionamiento en materiales sueltos y en aquellos que pueden ser fácilmente separados. Es...
The Standard Blunt tool is designed to deliver the full force of a hammers impact energy directly into the hard materials that it has been d...
Rammer's Super Blunt tool is designed to deliver the maximum force of a hammers impact energy directly into the boulders that it has been de...

Repuestos

La pasta de martillo es algo esencial para estos equipos; necesiat resistir altas temperaturas y presiones. La pasta para martillos Rammer h...
La pasta de martillo es algo esencial para estos equipos; necesiat resistir altas temperaturas y presiones. La pasta para martillos Rammer h...
La pasta de martillo es algo esencial para estos equipos; necesiat resistir altas temperaturas y presiones. La pasta para martillos Rammer h...
La pasta de martillo es algo esencial para estos equipos; necesiat resistir altas temperaturas y presiones. La pasta para martillos Rammer h...
Ensure cost efficient performance. Our service kits are designed to ensure that you have all the correct spares and wears on hand when it's ...
The Tool saver (TS) bushing has been designed to extend the service life for the tool and tool retaining pins in highly abrasive application...
The next level in cost efficient performance. Our service kits 2, kits are designed to ensure that you have all the correct spares and wears...

Accesorios

AGW

The AGW (Air, Grease & Water) service box is designed to be mounted on any excavator, to act as a mobile service unit for any the attachment...
Sistema automático de engrase que asegura una mayor duración del martillo hidráulico En principio, con este sistema se puede engrasar la her...
El compressor de aire Ramair se utiliza para prevenir que la suciedad entre al interior del martillo y así mantener la herramienta en perfec...
Ramdata II usa electrónica avanzada con sensores de impactos y stress en el martillo. Es un indicador de servicio para ayudar aloperador y e...

viernes, 24 de noviembre de 2017, CaseStory

The former Robotron building of EVB Robotron Anlagebau in Leipzig was located between the Intercity Hotel and the Westin Hotel in the Gerberstrasse. In 1989 the EVB conglomerate Robotron, which included 21 business operations, was the DDR's largest electronics and IT producer with a workforce of more than 67,000 people. EVB Robotron-Anlagenbau Leipzig was responsible for the deliveries and installation of IT systems and process computing systems. This was also the location of the training centre at which 170,000 participants from 18 countries were trained in 250 different courses up until 1980.

jueves, 20 de julio de 2017, CaseStory

In connection with the current remediation of contaminated sites south of the factory grounds of Boehringer Ingelheim Pharma GmbH & Co. KG, the old road bridge near the junction L428/Binger Straße in Ingelheim had to be demolished. The road was closed off completely during the demolition work, and all traffic had to be diverted through the inner city.

martes, 22 de marzo de 2016, News

Large Sydney Contractor doing a great job with the new Rammer Hammers 4099. Some say the Rammer 4099 is the most powerful hammer which can be used on a 36 to 50 ton excavator.

lunes, 16 de marzo de 2015, CaseStory

Removing a sizeable structure, such as a highway overpass, requires planning and preparation before the first piece of equipment rolls onto a work site. This is particularly true when the demolition project occurs on one of the most heavily congested freeways in southern California.

jueves, 8 de mayo de 2014, CaseStory

An Australian quarry operator has demonstrated its faith in the Rammer brand with the purchase of another new Rammer 4099 for a hard rock quarry application.

sábado, 15 de junio de 2013, News

Burton Contractors is one of Australia’s fastest growing Civil Engineering Contractors. The company was established in 1973 by founder John Burton. In 2006, successful succession planning saw the second generation, Paul and Chris Burton, take ownership of the business. By applying traditional family values and modern civil engineering expertise, Paul and Chris Burton continue to grow the business.