The RCC04R Cutter-Crusher is designed specifically for primary demolition and for use with mini and robot carriers. Both cylinder feature a hydraulic booster, which intensifies the input pressure, dramatically increasing the power-to-weight ratio, and supplying the performance that you would only normally see from much larger attachment. The RCC04R unique jaw design allows for large opening whilst maintaining its light structure.
Replaceable pearcing tip
A bolt on pearcing tip, removes the need for welding and rebuilding which lowers the cost of owning and operation.
The cylinders are fully protected throughout the working cycle. Increasing durability and extending service intervals.
Heat treated pins and bushings
Hardened parts are more wear resistant, extending their working life and lowering owning and operating costs
Manufactured from HB400 steel
Highly resistant material to work on concrete
Increases the power-to-weight ratio of the product by intensifing the input pressure in the cylinders
Integrated oil filter and cleaning system
Filters and maintains both the oil circuit and pressure thoughout the working cycle.
Free rotation mechanical brake
Enables the operator to control and place the equipment rapidly which increases the productivity
Bolt on, symmetrical cutter blades
Field replaceable and ajustable cutter blades minimize downtime and signifantly increase the working life of wear parts
Hydraulic excavators have largely replaced cranes with wrecking balls, enabling demolition to be carried out in a much more controlled and efficient manner.
rebar used extensivily in the construction industry to re-enforce concrete, as is designed to carry the tensile load.
Structural Steel is primarily removed during a demolition project by means of an attachment, with cutter blades.
|重量||300 kg||750 lb|
|颚最大开口||440 mm||17.32 in|
|Max. cutting force||1300 kN|
|Max. crushing force||440 kN|
|Closing time at max oil flow||2.3 s|
|Opening time at max oil flow||1.1 s|
|剪切刃长度||85 mm||3.35 in|
|No. of cycles per minute at max oil flow||17|
|Max. diameter to be cut||25 mm||0.98 in|
|最佳油温||40 - 60 °C||104 - 140 °F|
|允许油温范围||-20 - 80 °C||-4 - 176 °F|
|在操作温度下最佳油粘度||30 - 60 cSt|
|允许粘度范围||20 - 1000 cSt|
|载机重量，范围 *1||3 - 6 t||6600 - 13200 lb|
|*1 从载机制造商处核查载机允许的附件重量 检查应用需求。|
Specifications are subject to change without notice (2018年4月26日)