Specification

最小工作重量,法兰安装座  *12080 kg4590 lb
重量1900 kg4190 lb
颚最大开口750 mm29.53 in
Max. cutting force2680 kN
Max. crushing force1100 kN
颚宽度475 mm
工作压力300 - 350 bar4350 - 5075 psi
最大工作压力350 bar5075 psi
液压回转最大压力150 bar2175 psi
油流量范围180 - 200 l/min47.6 - 52.8 gal/min
液压回转流量30 l/min7.9 gal/min
Closing time at max oil flow1.4 s
Opening time at max oil flow2.3 s
No. of cycles per minute at max oil flow16.3
Max. diameter to be cut55 mm2.17 in
进油管接头(IN)SAE 6000 psi 1"
回油管接头(OUT)SAE 6000 psi 1"
接头,旋转1/2" GAS
最佳油温40 - 60 °C104 - 140 °F
允许油温范围-20 - 80 °C-4 - 176 °F
在操作温度下最佳油粘度30 - 60 cSt
允许粘度范围20 - 1000 cSt
载机重量,范围  *218 - 26 t39700 - 57300 lb
*1   包括通常的安装架和标准钎杆
*2   从载机制造商处核查载机允许的附件重量 检查应用需求。

Specifications are subject to change without notice (2018年4月26日)

News and case stories

2017年7月20日, CaseStory

In connection with the current remediation of contaminated sites south of the factory grounds of Boehringer Ingelheim Pharma GmbH & Co. KG, the old road bridge near the junction L428/Binger Straße in Ingelheim had to be demolished. The road was closed off completely during the demolition work, and all traffic had to be diverted through the inner city.