The RSS58R Scrap Shears can be used in every industrial demolition job involving the cutting and recovery of ferrous materials such as iron sections, pipes, tanks, railway carriages etc
Replaceable pearcing tip
A bolt on pearcing tip, removes the need for welding and rebuilding which lowers the cost of owning and operation.
Hydraulic rotation with protection valve
The protected rotation system allows precision tool placement, lowering/reducing owning and operating costs.
Field replaceable and adjustable central pin
Enables the operator to maintain the product on the site keeping cutting capacity on the maximum level.
Shorter working cycles to increase productivity
The cylinders are fully protected throughout the working cycle. Increasing durability and extending service intervals.
Smart jaws design featuring double guide
Avoids material to stuck between the jaws which increases productivity and cutting capacity
Heat treated pins and bushings
Hardened parts are more wear resistant, extending their working life and lowering owning and operating costs
Manufactured from HB400 steel
Highly resistant material to work on concrete
Bolt on, symmetrical cutter blades
Field replaceable and ajustable cutter blades minimize downtime and signifantly increase the working life of wear parts
Structural Steel is primarily removed during a demolition project by means of an attachment, with cutter blades.
The metal recycling industry encompasses a wide range of metals. The more frequently recycled metals are scrap steels.
Scrapyards (also known as a wrecking yard, junkyard, or breaker's yard) trade in scrap.
Ship breaking or ship demolition is a type of ship disposal involving the breaking up of ships for either a source of parts, which can be sold for re-use, or for the extraction of raw materials, mainly scrap.
|最小工作重量，法兰安装座 *1||5880 kg||12960 lb|
|重量||5560 kg||12260 lb|
|颚最大开口||760 mm||29.92 in|
|Max. cutting force||4780 kN|
|Max. crushing force||1850 kN|
|Jaw depth||780 mm|
|工作压力||320 - 350 bar||4640 - 5075 psi|
|最大工作压力||350 bar||5075 psi|
|液压回转最大压力||115 bar||1670 psi|
|油流量范围||275 - 375 l/min||72.6 - 99.1 gal/min|
|液压回转流量||30 l/min||7.9 gal/min|
|Closing time at max oil flow||4.3 s|
|Opening time at max oil flow||5.3 s|
|No. of cycles per minute at max oil flow||6.2|
|Max. diameter to be cut||110 mm||4.33 in|
|进油管接头（IN）||SAE 6000 psi 1 1/4"|
|回油管接头（OUT）||SAE 6000 psi 1 1/4"|
|最佳油温||40 - 60 °C||104 - 140 °F|
|允许油温范围||-20 - 80 °C||-4 - 176 °F|
|在操作温度下最佳油粘度||30 - 60 cSt|
|允许粘度范围||20 - 1000 cSt|
|载机重量，范围 *2||51 - 65 t||112400 - 130000 lb|
*2 从载机制造商处核查载机允许的附件重量 检查应用需求。
Specifications are subject to change without notice (2018年2月6日)