The RPV22S Static Pulveriser, is the ideal attachment for secondary demolition. The RPV22S is the perfect tool for crushing reinforced concrete and separating the rebar from the aggregate.
Shorter working cycles to increase productivity
The cylinders are fully protected throughout the working cycle. Increasing durability and extending service intervals.
Field replaceable wear parts
Minimise downtime as there is no need for welding/rebuilding
Grated jaw design
The fixed jaw allows crushed material to pass through increasing productivity
Heat treated pins and bushings
Hardened parts are more wear resistant, extending their working life and lowering owning and operating costs
Manufactured from HB400 steel
Highly resistant material to work on concrete
Bolt on, symmetrical cutter blades
Field replaceable and ajustable cutter blades minimize downtime and signifantly increase the working life of wear parts
Hydraulic excavators have largely replaced cranes with wrecking balls, enabling demolition to be carried out in a much more controlled and efficient manner.
You can increase crusher capacity by up to 50% through good preparation of the input material. The maximum size should be about 80% of the crusher inlet opening.
rebar used extensivily in the construction industry to re-enforce concrete, as is designed to carry the tensile load.
|Minimum working weight||2205 kg||4860 lb|
|重量||2025 kg||4460 lb|
|高度||2070 mm||81.5 in|
|颚最大开口||830 mm||32.68 in|
|Max. cutting force||2100 kN|
|Max. crushing force||1170 kN|
|颚宽度||550 mm||21.7 in|
|工作压力||280 - 320 bar||4060 - 4640 psi|
|最大工作压力||320 bar||4640 psi|
|油流量范围||180 - 220 l/min||47.6 - 58.1 gal/min|
|Closing time at max oil flow||2.3 s|
|Opening time at max oil flow||2.3 s|
|No. of cycles per minute at max oil flow||10.6|
|Max. diameter to be cut||55 mm||2.17 in|
|进油管接头（IN）||SAE 6000 psi 1"|
|回油管接头（OUT）||SAE 6000 psi 1"|
|最佳油温||40 - 60 °C||104 - 140 °F|
|允许油温范围||-20 - 80 °C||-4 - 176 °F|
|在操作温度下最佳油粘度||30 - 60 cSt|
|允许粘度范围||20 - 1000 cSt|
|载机重量，范围 *1||18 - 25 t||39700 - 55100 lb|
|*1 从载机制造商处核查载机允许的附件重量 检查应用需求。|
Specifications are subject to change without notice (2018年2月6日)